Bouncy castles are afraid of scratches. It is like our clothes, even the best fabrics are afraid of scratches. Therefore, when you use the bouncy castle, you must ensure that there is enough space to put down the product, and the ground must be flat without hard objects. It is best to lay a layer of cloth on the ground. When children are playing, be sure to prohibit them from bringing hard and sharp objects up, it is best to let them play in slippers.
Bouncy castles are afraid of dragging. When you need to move the bouncy castle business location, even if it is a short distance, you must first stow them and then move them. Do you know the maintenance skills? If the bouncy castle is dragged directly on the ground, the maintenance of the bouncy castle And then over time, it will be easy to wear out.
Then there is the problem of cleaning the bouncy castle. The surface of the bouncy castle will get very dirty. For the dust on the surface of the bouncy castle, you only need to use a broom and other tools to pat it away. If it is mud, you need to wipe it with a damp cloth.
When using the bouncy castle, it should not be in contact with sharp objects to avoid scratching the airbag; when using it, strictly follow the instructions in the manual, and the precautions in the manual should be followed first.
When the temperature is high in summer, the air volume should not exceed the above-mentioned standard, and the air volume should be checked at any time. When the basic maintenance pressure is too high, it should be properly deflated; in winter and in the morning, when the temperature is slightly lower, pay attention to proper pressure supplementation, so as not to affect the normal use.
Its products generally use the principle of structural mechanics to design the frame, use the gas pressure characteristics to inflate the airbag to form a rigid cylinder, and support the skeleton of the inflatable castle through organic combination. With the strength of the skeleton material used, it determines the service life of the frame and the maintenance of the rigidity of the frame; and the rationality of the air chamber setting determines the support limit of the entire frame.
