(1) Eyes: It is divided into plastic eyes, crystal eyes, cartoon eyes, movable eyes, etc.
(2) Nose: It is divided into plastic nose, flocking nose, wrap nose, matte nose, etc.
(3) Ribbon: If the color is specified, the quantity is small, or the style is specified, please pay attention to the quantity of the order.
(4) Plastic bags: (PP bags are commonly used in American products and are cheaper, and European products must use PE bags; the transparency of PE bags is not as good as that of PP bags, but PP bags are easier to wrinkle and break), PVC can only be used as a packaging material (DEHP content must be limited within 3%/square.) Heat shrinkable film is mostly used for color box packaging as a layer of protective film.
(5) Carton: (two types)
Double corrugated A=B, A=C, B=B, B=C, C=C, three corrugated, A and three B are also available (such as backpack series), unless specified by the customer, usually export boxes use A= B, B=B or B=C can be considered for the export box with small size. Before ordering a carton; you should choose a genuine supplier first, and you must first confirm the various types of paper provided by the carton factory. Note that each company may be different. You should choose genuine products. At the same time, you should also pay attention to the quality of each batch of goods to prevent suppliers from using Substandard products pretend to be genuine products, and other factors such as weather humidity, rainy season climate and other factors may also have adverse effects on paper quality.
Single flute B33, C33, etc. are usually used as inner boxes, or revolving cartons for domestic delivery. The quality of the outer paper and inner flute determines the rigidity of the carton.
(6) Cotton: 7D, 6D, 15D, and A, B, and C grades. What we use now is usually 7D/A grade, and 6D is less used. Low-grade products or products with very full and hard fortresses should be 15D/B or C grades. 7D is very smooth and elastic, 15D is rough and hard.
According to the fiber length, it is divided into 64MM and 32MM cotton. The former is used for manual punching and the latter is used for machine punching.
The general practice is to loosen the cotton by entering the raw cotton. It is necessary to ensure that the cotton loosening worker operates correctly and has enough times of loosening the cotton so that the cotton can be completely loosened to achieve good elasticity. If the loose cotton effect is not good, it will cause a great waste of cotton consumption.
(7) Rubber particles: (PP, PE), the diameter should be greater than or equal to 3MM, and the particles are smooth and uniform. Products exported to Europe are usually more environmentally friendly with PE. Except for the special requirements of customers, PP or PE can be used for export to the United States, and PP is cheaper. Unless otherwise specified by the customer, all rubber pellets for export products must be wrapped in inner bags.
(8) Plastic parts: ready-made plastic parts, the body cannot be changed, such as size, size, shape, etc., otherwise it is necessary to open a mold. Generally, the cost of plastic molds is expensive, ranging from several thousand yuan to tens of thousands of yuan, depending on the size of the mold and the process. Difficulty depends on the choice of mold material, so usually the production order output is less than 300,000, and the mold fee must be calculated separately.
(9) (Color) printed matter: including color boxes, tags, stickers, etc. The price of color printing is directly related to the number of orders. If the order is small, the number of printed sheets will be small, which will easily cause large color differences, uneven colors, and loss of manufacturers. The proportion increases, so the unit price must be high.
When implementing the unit price of printed matter, it is necessary to pay attention to whether it includes film, proofing (print-proof), glue polishing (coating) and other expenses. For customer-specified patterns, it is best for the customer to provide film and color draft, and color ratio (four-color CMYK) ratio), which increases the speed and accuracy of the board.
(10) Cloth labels and woven labels: they must pass 21 pounds of tension, so thick belts are now used instead.
(11) Cotton belts, webbing belts, silk ropes, and elastic bands of various colors: pay attention to distinguishing the different textures of raw materials and their impact on product quality and cost.
(12) Velcro, buckles, zippers: Velcro should have high fastness (especially when the functional requirements are high).
